Andrew James Bread Maker Bedienungsanleitung PDF herunterladen (Seite 6)

Using the mixing bowl

1. Place the mixing bowl into its holding device and turn the dish in the

direcon of “LOCK” unl it locks into place.

2. In order to li the arm, press the lever (12) downwards in the

direcon of the arrow. The arm will now move upwards.

3. Mount the required utensil by inserng the top into the drive sha

and locking the coer pin in the sha by turning it to the right.

4. Now place your ingredients in the bowl. Do not overll the machine,

the maximum quanty of ingredients is 4.0 KG.

5. Lower the arm using the lever (12).

6. Insert the mains plug into a properly installed 230 v/50 Hz safety

power socket.

7. Switch on the machine using the control panel to a speed between 1

and 6 (corresponding to the mixture).

8. Heavy mixture operang me: when mixing heavy mixes, do not

operate the machine for more than 4 minutes and allow it too cool

down for a further 10 minutes before using it again. We recommend

that you use the metal beater blade supplied as the blade is designed

for large and heavy mixes. Use the splash guard to protect against

liquid measures.

9. Aer kneading/ srring, switch back to the “ON/OFF” posion as soon

as the mixture has formed a ball. Then remove the mains plug.

10. Press the lever downwards and the arm will be raised.

11. The mixture can be released with the help of a spatula and removed

from the mixing bowl.

12. The mixing bowl can now be removed by turning it to the le.

13. Clean the parts as described under “Cleaning”.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Keine Kommentare

Andrew James Bread Maker Bedienungsanleitung Seite 6